TUE - SUN: 11:00 AM – 07:00 PM
Facial Implants (Chin & Jaw)

Facial Implants (Chin & Jaw) | Consultation, Facial Assessment, and Planning

Consult Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery) • RMC Reg. 28041/14185 • Nov 2026

Patient Questions & Answers
← FAQ Directory

What happens during a facial implant consultation?

#

A facial implant consultation usually reviews your goals, medical history, facial examination and photographs, then discusses implant areas, shapes, expected changes and risks. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain what facial implants may and may not change and whether they suit your concern.

What this means for you

Facial implants are solid, pre-shaped three-dimensional objects used to enhance specific facial areas such as the chin, jaw and cheeks, aiming for a more harmonious, balanced appearance. During consultation, the surgeon clarifies the diagnosis and explains what each procedure can and cannot do, often using photographs, models or digital images. A complete past history and pictures from several positions help make the discussion objective. Risks and possible complications are also discussed, because outcomes depend on patient factors, implant material and surgical technique. Facial implants are also used for cosmetic, traumatic or congenital asymmetries; although natural tissue is considered ideal, it can have donor-site problems, resorption and limited shaping, so inert implant materials are often chosen.

Care and next steps

Facial implant surgery is commonly performed under general anaesthesia or intravenous sedation with local anaesthesia and takes about one and a half hours. Preparation may include stopping medicines or foods that affect clotting and, for intraoral approaches, dental hygiene measures. After surgery, antibiotics and diet instructions may be used depending on access route. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss suitability, expected changes and risks.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

How does a plastic surgeon assess facial proportions before facial implant surgery?

#

Before facial implant surgery, assessment is mainly a careful physical examination and discussion of your goals, often with photographs. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how facial balance, asymmetry and desired contour changes guide implant choice and placement. All faces are asymmetric, so existing differences are discussed beforehand.

What this means for you

Physical examination is the most important part of preoperative planning, and reviewing photographs with you can clarify aesthetic concerns and goals. All faces are asymmetric, so the surgeon should point out existing asymmetry before surgery so you can anticipate it afterward. Most aesthetic augmentation does not need preoperative radiologic evaluation; implant size and position are largely based on the surgeon’s aesthetic judgement. In specific cases, such as a surgically altered or traumatically deformed skeleton, cephalometric X-rays or CT scans may be needed. During consultation, the surgeon also inspects volumetric status of relevant areas, and sizer implants may help final decisions. When performed by a qualified plastic surgeon, facial implants are considered safe and effective, but risks should be discussed.

Care and next steps

Significant complications are rare with midface implants; early swelling can occur, and minor fluid collections often settle, while larger ones may need aspiration. The procedure is approximately one and a half hours. General anaesthesia or intravenous sedation with local anaesthesia are commonly used. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss your goals, likely improvement and possible risks.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Which facial measurements are considered before choosing facial implants?

#

Facial implant planning considers your physical examination, life-size front and side photographs, and sometimes head X-rays, along with normal facial proportions and surface landmarks. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how these measurements guide implant size, shape and position for your facial balance.

What this means for you

Physical examination is the most important part of preoperative assessment. Reviewing life-size front and side photographs with you helps discuss aesthetic concerns and goals. Head X-ray analysis can help, but implant size and position are largely aesthetic judgments. Neoclassical ideal proportions have limited value because some are never seen or are only one variation among healthy people. Normal facial measurements guide the surgeon's overall judgment. All faces are asymmetric, so this should be recognized before surgery. Small increases in skeletal projection can noticeably change appearance. Anthropometric measurements of normal faces are more useful than arbitrary ideals, and asymmetry should be discussed with you before surgery so expectations stay realistic.

Care and next steps

Implants must be appropriately sized, shaped and positioned; too-large implants can look unnatural. Malar-zygomatic markings and sizers may help final decisions. Risks and limitations should be discussed with your surgeon. Surface landmarks and normal proportions help avoid unnatural contours; your surgeon can also review photographs and explain likely changes. If facial contour concerns you, you may consult Dr. Vishal Purohit in Jaipur to discuss realistic goals, asymmetry and implant planning.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

How do surgeons determine the appropriate facial implant size?

#

Surgeons choose facial implant size by assessing your overall build, head size, facial proportions and the view from every angle, not just one measurement alone. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how implant shape, placement and your goals are balanced during consultation.

What this means for you

Facial implants are solid, pre-shaped objects used to enhance chin, jaw or cheek contours for a more balanced appearance. Size selection is not simply matching a retrusive chin on a side view; a large implant can widen the chin from the front, while a chin with a strong forward curve may need jaw surgery rather than an implant. Surgeons also consider skin and muscle conditions, genetic asymmetry, and may use temporary sizers or modify implants to fit bony contours. The implant's shape and position are also checked against your facial zone markings before surgery. The final plan balances appearance with safety and your preferences.

Care and next steps

Facial implant surgery is usually about one and a half hours, with general anaesthesia or sedation commonly used. Aftercare may include antibiotics, mouth care, diet changes, dressings or drains, and risks should be discussed with your surgeon. Scars and recovery vary, so expectations should be discussed individually. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss likely improvement, implant options and recovery expectations.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

How do surgeons select the shape of a facial implant?

#

Surgeons choose a facial implant’s shape from the treated area, your facial anatomy and the contour change you want, not from one standard shape. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how available implant shapes may fit your goals and what trade-offs to expect.

What this means for you

The anatomic shape is the key factor in copying natural facial contours, and different materials and shapes are chosen for the treated area and desired change. Common sites include the chin, jaw, cheeks and nasal bridge. The surgeon must have common sizes and shapes available; size is guided by skin and muscle conditions, and overall head size helps avoid an implant that looks too wide from the front. For complex three-dimensional deformities, custom patient-specific implants may be considered. Trying sample implants and marking the face can help refine the choice before surgery. This preoperative assessment and patient education can improve precision in alloplastic facial augmentation. It applies equally in primary or secondary procedures.

Care and next steps

Facial implants are considered safe and effective when performed by a qualified plastic surgeon, but risks should be discussed. The procedure takes about one and a half hours, usually under general anaesthesia or intravenous sedation with local anaesthesia. Incisions are made away from the implant site, and antibiotics, careful oral hygiene and follow-up help reduce infection risk. If you are considering facial contouring, you may consult Dr. Vishal Purohit in Jaipur to discuss implant options, incision placement and recovery.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Will my facial bone structure affect the choice of facial implant?

#

Yes. Your facial bone shape can influence which implant is chosen and how stable it stays. Facial implants are solid, pre-shaped pieces used to enhance the chin, jaw or cheeks, and some are custom-made to fit your own bone. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how your bone shape, soft-tissue thickness and goals affect this choice.

What this means for you

Underlying bone architecture can make an implant less stable, while thicker overlying soft tissue may lower the chance of exposure or extrusion. Implants may be stock or custom-made; custom ones are planned to match your bone. Materials such as porous polyethylene, titanium and PEEK are used, and they behave differently: silicone is flexible and easier to remove, while porous polyethylene integrates with tissue and is harder to remove. Facial implants are also used for cosmetic, traumatic or congenital asymmetry, and the material must be biocompatible and stable enough for facial forces. The choice balances contour goals, anatomy, material properties and surgical judgment.

Care and next steps

Facial implant surgery usually takes about one and a half hours, with general anaesthesia or intravenous sedation with local anaesthesia commonly used. When performed by a qualified plastic surgeon, facial implants are considered safe and effective, but risks should be discussed with your surgeon. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss how your facial bone structure, implant material and expected contour changes relate to your goals.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Will my facial muscles affect the final appearance of facial implants?

#

Facial muscles and soft tissues can influence how facial implants look, but implants mainly change underlying skeletal projection; final appearance depends on implant position, soft-tissue thickness and individual anatomy. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how your facial structure and muscle activity may affect expected contour.

What this means for you

Facial implants are solid, pre-shaped objects used to enhance chin, jaw and cheek contours. The material must be biocompatible and stable enough to withstand chewing and facial muscle forces. Both soft tissues and the facial skeleton shape appearance; skeletal augmentation increases projection, while soft-tissue filling can blunt contours. Jaw-muscle contraction after its supporting sling is disrupted can alter overlying soft tissue. Incisions are kept away from implants, and screw fixation helps prevent migration. Results vary with age, skin quality, bone structure and health. Different materials and shapes are chosen for the treated area and desired contour, and outcomes are generally permanent but individual results vary.

Care and next steps

Most patients go home the same day. Temporary discomfort, swelling and mild bruising are common; bruising and swelling usually subside over following weeks. Many patients return to work and normal activities within a few days to a week. In some cases an implant may need removal or replacement, and implant rejection is extremely rare. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss expected contour, risks and recovery.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Do I need facial photographs before facial implant surgery?

#

Yes, preoperative facial photographs are usually needed before facial implant surgery. They record your starting appearance, help plan implant placement and discuss goals with you. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain which standard views and imaging may be used for your assessment before surgery and why they matter.

What this means for you

Photographs are not a substitute for physical examination, which remains the most important part of planning. Standardized views help identify subtle facial asymmetry before surgery, so you can anticipate it afterward. Pre- and postoperative images also serve as clinical and legal records and help assess results. Computer imaging may be used to discuss possible changes, but it is a planning aid, not a guarantee. Standard photographs are usually taken with consistent lighting, distance, background, position and pose; patients are often photographed without makeup, jewelry or glasses, with hair pinned back and ears visible. They also help guide surgery and later comparison of results with your surgeon.

Care and next steps

They help your surgeon compare changes after surgery and discuss results with you. They also document your preoperative state, guide follow-up comparisons and support outcome review. A careful history and examination still come first. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss photography, planning and realistic expectations before surgery. They remain useful for later comparison with your surgeon and for reviewing your progress.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Is a CT scan required before facial implant surgery?

#

A CT scan is not routinely needed for purely cosmetic facial implant surgery, but it is almost routine for reconstructive work and essential for custom CAD/CAM implants. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain whether imaging would help your planned implant and facial anatomy.

What this means for you

Facial implants improve chin, jaw or cheek shape. For standard cosmetic cases, careful examination and sometimes plain X-rays may help, but preoperative imaging is uncommon. CT scans show detailed bone shape in multiple planes and are fundamental for custom implants, especially complex three-dimensional deformities or prior jaw surgery. Cone beam CT uses less radiation and cost but has a limited custom-implant role. MRI assesses soft tissue, not bone. The surgeon also considers your wishes, previous facial surgery or orthodontic treatment, and examination of bone and soft tissue. Custom implants may suit complex three-dimensional deformities, especially both sides or after prior jaw surgery. Cephalometric X-rays are most often used for planning chin and mandibular augmentation surgery.

Care and next steps

Facial implant surgery usually takes about one and a half hours under general anaesthesia or sedation with local anaesthesia, with antibiotics and careful mouth care. Risks include bleeding, infection, asymmetry, numbness, implant movement or bone thinning. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss imaging, incision placement, realistic contour goals and recovery expectations.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Is special imaging required for facial implant planning?

#

Special imaging is not required for every facial implant plan; many standard implants are planned from examination and photographs, while CT scanning is especially useful for asymmetry or custom implants. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain which imaging, if any, fits your facial goals and anatomy.

What this means for you

Physical examination is the most important part of preoperative assessment, and all faces have some asymmetry. Preoperative X-ray images can be helpful but are not mandatory for implant surgery. CT scans and models are the gold standard for planning surgery to improve facial skeletal asymmetries, and custom implants can be made from those data. When a custom implant is needed, a high-resolution CT scan with 0.1 mm slices is used, then the design is created online and fabrication usually takes about three weeks. The surgeon provides all dimensions; software ensures fit but cannot predict final appearance. Custom computer-designed implants are especially considered for three-dimensional deformities.

Care and next steps

Facial implant surgery is approximately one and a half hours and commonly uses general anaesthesia or intravenous sedation with local anaesthesia. Antibiotics, careful oral hygiene and a liquid then soft diet may be part of aftercare, and complications such as bleeding, infection, asymmetry or implant problems should be discussed beforehand. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss whether standard or custom planning suits your face.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Can computer simulations show how my face will look after facial implant surgery?

#

Computer simulations can show a realistic preview of possible facial implant results, but they are an educational guide, not a guarantee of your exact outcome. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain what imaging can and cannot predict for your facial contours and expectations.

What this means for you

Facial implants are solid, pre-shaped objects used to enhance areas such as the chin, jaw and cheeks. Computer imaging can project realistic-looking postoperative predictions, measure and evaluate facial features, facilitate communication, help you express desired changes and identify unrealistic expectations. One study found patient satisfaction significantly improved when preoperative imaging was included versus no imaging. However, the final result will never be exactly what appears on screen; imaging is a simulation and should realistically represent what the surgeon can achieve, with under-imaging often most effective. Patients should be told imaging is simply a tool that helps them understand what can be achieved in surgery, and legal and ethical discussions continue.

Care and next steps

Facial implant surgery is usually about one and a half hours under general anaesthesia or intravenous sedation with local anaesthesia, and risks should be discussed with your surgeon. There are different implant materials and shapes chosen according to area and desired contour changes. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss realistic imaging, implant choices and possible risks.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Can I preview different chin implant sizes before facial implant surgery?

#

You cannot reliably preview an exact chin implant size before surgery; the final choice depends on three-dimensional facial analysis and surgical judgment. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain how your chin, jawline and neck are assessed and what improvement is realistic.

What this means for you

Facial implants are solid, pre-shaped objects used to enhance the chin, jaw and cheeks for a more harmonious, balanced appearance. There are different implant materials and shapes, chosen according to the area treated and the desired contour changes. Choosing size is crucial because a large implant can widen the chin on the frontal view even if the profile improves; women are often treated with undercorrection to avoid an implant perceived as too large. Surgeons consider the chin, jawline and neck from all views in three dimensions, along with patient desires, photographs and possible imaging. Severe microgenia or certain occlusal problems may require orthognathic surgery rather than simple augmentation.

Care and next steps

When performed by a qualified plastic surgeon, facial implants are considered safe and effective, but risks should be discussed. Possible complications include bleeding, infection, over- or under-correction, malposition, asymmetry and nerve changes. The procedure takes about one and a half hours, and general anaesthesia or intravenous sedation with local anaesthesia are commonly used. If you are considering chin augmentation, you may consult Dr. Vishal Purohit in Jaipur to discuss realistic contour change, implant size and risks.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Can I preview different cheek implant shapes before facial implant surgery?

#

Yes, you can preview cheek implant placement before surgery. Dr. Vishal Purohit, M.Ch. plastic surgeon in Jaipur, can explain how lying back, drawing implant outlines, using sizers and reviewing photographs help you understand possible cheek contour changes, while acknowledging that previews are guides, not guarantees.

What this means for you

Preoperative planning matters because cheek implants are solid, pre-shaped objects chosen for the area and desired contour. The surgeon and patient decide the area, size and configuration together. Lying back reduces gravity's effect so tissues settle into a more natural position, while drawing outlines or applying sizers helps compare symmetry and placement. Photographs can help discuss goals. Existing asymmetry is common and should be discussed beforehand; sometimes different sizes are used. Custom implants may be considered for unusual anatomy or reconstruction. Oral health is also checked, because dental or gum disease can increase infection risk and should be treated first. Previews remain guides, not exact predictions.

Care and next steps

Facial implants are generally considered safe and effective when performed by a qualified plastic surgeon, but risks should be discussed. The procedure takes about one and a half hours, and general anaesthesia or intravenous sedation with local anaesthesia are commonly used. A consultation can also review asymmetry and oral health before planning. If cheek shape concerns you, you may consult Dr. Vishal Purohit in Jaipur to discuss implant options, symmetry and realistic expectations.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Can facial implants be customized to my facial anatomy?

#

Facial implants can be customized to your facial anatomy, but not every case needs a bespoke implant. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain during consultation whether stock implants, intraoperative sizers, or a CT-based custom design better matches your goals, anatomy, limitations, and expected outcomes.

What this means for you

Facial implants are solid three-dimensional objects that change facial form by adding volume in selected areas such as the chin, jaw or cheeks. Custom implants can be designed from a CT scan and computer model, and 3D-printed patient-specific implants can be tailored to individual anatomy. However, one surgeon notes that stock implants come in many shapes and sizes, so custom implants are especially useful for unusual anatomy or reconstructive needs rather than every routine augmentation. The choice depends on your anatomy, goals and the area treated. Bespoke implants are custom-engineered to the patient's facial skeleton and can address asymmetries, while stock implants may be selected with intraoperative sizers during surgery for fit.

Care and next steps

Facial implant surgery is commonly performed under general anaesthesia or intravenous sedation with local anaesthesia and takes about one and a half hours. When performed by a qualified plastic surgeon, facial implants are considered safe and effective, but risks should be discussed with your surgeon. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss customization options, incision placement and expected limitations.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

What is the difference between standard and custom-made facial implants?

#

Standard facial implants are prefabricated shapes and sizes that your surgeon can trial with sizers during surgery, while custom-made implants are designed from your CT scan to match your facial skeleton and desired contour. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain which option may suit your anatomy and goals.

What this means for you

Standard implants come in many shapes and sizes, and surgeons often place several sizers in the pocket before choosing the best fit for your face. Custom implants are usually made from a three-dimensional CT scan, computer-designed, and manufactured in silicone; the process often takes about three weeks. Custom designs can address asymmetry, unusual anatomy, or complex contour needs, but stock implants are diverse enough for many patients. Custom implants are also the costliest option. The choice depends on your anatomy, goals, and whether standard shapes can achieve the balance you want. If preformed implants gave inadequate results, your surgeon may consider a custom implant.

Care and next steps

Recovery and risks vary with implant site, size, and whether surgery is combined with other procedures. Common concerns include swelling, bruising, infection, asymmetry, or implant movement, so follow-up matters. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss standard versus custom options, likely improvement, and recovery expectations. A qualified plastic surgeon can review your anatomy and goals before recommending an approach.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

Can the surgeon guarantee a particular facial shape with facial implants?

#

No surgeon can guarantee a particular facial shape with facial implants. Results depend on your bone structure, soft tissue, implant choice, position and surgical planning. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can explain what facial implants may realistically improve, including symmetry limits and possible asymmetry, before you decide.

What this means for you

Facial implants are solid, pre-shaped objects used to enhance specific areas such as the chin, jaw and cheeks, aiming for a more harmonious, balanced appearance. Different implant materials and shapes are chosen according to the area treated and the desired contour changes. When performed by a qualified plastic surgeon, they are considered safe and effective, but risks remain and should be discussed. Predictability depends on understanding facial topography and anatomy, careful technique, and clear surgeon-patient communication; critical facial analysis supports optimal satisfaction. Implants that fit the facial skeleton well help reduce movement and poor positioning, yet over- or under-correction and asymmetry are recognized complications. Custom-made implants can help more complex contour defects.

Care and next steps

After surgery, swelling, bruising and fluid accumulation can occur; cold packs, steroids, aspiration or drainage may be used if needed. Implants may be screw-fixed to reduce migration, and access incisions are made away from the implant. If you are considering facial implants, you may consult Dr. Vishal Purohit in Jaipur to discuss realistic contour goals, implant options, and possible risks.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026

What questions should I ask my plastic surgeon before facial implant surgery?

#

Before facial implant surgery, ask about your goals, implant material, shape and size, insertion route, infection and numbness risks, fixation, recovery, possible removal and realistic improvement, including how asymmetry may remain. M.Ch. plastic surgeon Dr. Vishal Purohit in Jaipur can help you understand which questions matter for your facial area and expectations.

What this means for you

A good consultation first defines the problem you want changed, your expectations, any facial asymmetry, medical history, allergies, medications, prior surgery and photographs; three-dimensional CT may help if anatomy is unusual. Preparation also includes stopping medicines or foods that affect clotting, dental cleaning and chlorhexidine mouthwash for 48 to 72 hours. Incisions are made through intact skin away from the implant, and antibiotics are used around surgery. Complications such as bleeding, infection, asymmetry, numbness or implant movement are uncommon but should be discussed. Ask how the implant will be fixed, what happens if it must be removed, and how asymmetry may remain.

Care and next steps

The procedure is approximately one and a half hours and may use general anaesthesia or intravenous sedation with local anaesthesia. Ask about recovery, swelling, diet, mouth care and when you can resume normal activities, including numbness and implant movement. Risks should be discussed with your surgeon. If facial implant surgery concerns you, you may consult Dr. Vishal Purohit in Jaipur to discuss your goals, likely improvement, risks and recovery plan.

Prepared for clinical review — consultation:Dr. Vishal Purohit, MBBS, MS, MCh (Plastic Surgery)•RMC Reg. 28041/14185•Source and style checked: November 2026
Select a topic
Or view all 33 topics as a list↓